Maya Tutorial - Mirror Error

When I went to mirror the head I noticed that it didn't work the way it was supposed. It seemed to pinch part of the model out of shape for no reason.


When I tryed to move the vertexs I saw that the mirror had created an extar face as well.



I've had to undo the mirror and try it again but I still get the same results each time, I've also checked and double checked the mirror settings but they are the same as the ones in the video.


Comments

  1. Alan Postings7:35 pm, September 30, 2017

    Ok. The problem is that the vertices along the edge weren't aligned exactly on the centre of the grid.

    1) Select one side of the model and delete it.
    2) Select all the vertices on the inside edge (zoom in to make sure you get them all).
    3) Use the scale tool to align them - use a single direction (normally x-red) a few times until you see everything is in a line.
    4) Hold down the X key and snap the vertices back onto the centre line of the grid.
    5) Now mirror.

    ReplyDelete

Post a Comment

Popular posts from this blog

Film Review - 2001: A Space Odyssey

Image
Fig 1. 2001: A Space Odyssey Poster (1968) 2001: A Space Odyssey (1968) is one of the many classics brought to life by Stanley Kubrick. The film stands out in the world of cinema nowadays for the way it was produced but at the time of its release it didn’t receive that many good reviews from the critics, however, it inspired future film makers such as Steven Spielberg and Ridley Scott. Like with most of his films Kubrick frames or centres most of the shots using the rule of thirds a technique that he learned from his days as a photojournalist for Look magazine. As shown in Fig 2 the rule of thirds involves placing a 3x3 grid over the image and lining up the key subjects within it so that everything is not cluttered on one side, in Kubrick’s case he places key subjects in the middle of the grid with other subjects on both sides of it so that the audience’s eye is drawn to what is being shown in the middle. As show in the example Dave Bowman and Frank Poole are on ever
Read more

Film Review: Kung Fu Panda - Act Structure

Image
Kung Fu Panda (2008) directed by John Stevenson and Mark Osborne can be broken down in to the different acts that take place. Sometimes it can be broken down in to a 3 act stuctre or a 5 act stuctre but ever way they both have the same points that happen in the story that introduct the characters, show us what problems they have to face that lead up to the big cilmax before everything is goes back to the way that it was at the begining. Below is how I have broken down Kung Fu Panda using the 5 act stuctre along with working out the plot and ending type of the film. The 5 Act Stuctre shown with Freytag's Pyramid The plot of the film is similar to a Arc Plot. Po changes as the story goes on and the characters around him also change. This means that when one thing happens it will affect what happens next or start the next sturcture. I see the ending of Kung Fu Panda as being a Partial Ending as the story has ended but we get the feeling that this is not the end of Po and
Read more

@Simon - Mesh Mishap

Image
I can't unfold the mesh. :( I've done everything in the video but for some reason this won't work. The error at the bottom says: "Mesh has non-manifold edges. Clean up the mesh before using unfold." and I don't understand what it means.
Read more